A Mold Remediation Protocol is typically written when items or areas have been identified containing an unacceptable amount or type of mold and a client requires an industry-recognized method of removal or cleaning instructions.
Before a Mold Remediation Protocol is written, a mold assessment is conducted by a qualified Mold Assessor (some States have licensure requirements). The information that is gathered, which includes but not limited to; a site visit, client interviews, room drawings, temperature & Relative Humidity readings, cause & origin, and sampling (where applicable), are used in the report generation.
Though no federal standards have been set for mold remediation, industry guidance, and practices have been established. Those are:
- United States Environmental Protection Agency. Mold Remediation in Schools and Commercial Buildings (EPA Publication No. 402-K-01-001). Washington DC: US EPA
- American Conference of Governmental Industrial Hygienists. Bioaerosols: Assessment and Control. ISBN: 882417-29-1 Cincinnati OH: ACGIH
- New York City Department of Health Guidelines on Assessment and Remediation of Fungi in Indoor Environments. New York New York: New York City Department of Health
- Institute of Inspection Cleaning and Restoration Certification. Standard and Reference Guide for Professional Mold Remediation. Vancouver, WA: IICRC S520
- American Industrial Hygiene Association. Recognition, Evaluation, and Control of Indoor Mold. Fairfax, VA: AIHA
- American Industrial Hygiene Association. Field Guide for the Determination of Biological Contaminants in Environmental Samples. Fairfax, VA: AIHA
- American Council for Accredited Certification. CIE, CMI, CMR. Glendale, AZ: ACAC.
Who should have a Mold Remediation Protocol Written?
Anyone that is going to have work performed where mold has been identified either visually or by a qualified Mold Assessor.
What is performed with a Mold Remediation Protocol?
Interview – Review and discussion with an authorized representative of the Property of current conditions which have led to the claim.
Site Assessment – A physical site assessment of the Property in the area(s) of concern to: visually assess the damage(s), retrieve temperature and RH readings, take air and direct samples for mold (if applicable), and gather room dimension to create room/floor drawings to identify the location(s) of concern.
- Air Sampling – The purpose of non-viable spore trap air sampling is to provide an approximation of the airborne microbial (fungal) spore concentrations. A minimum of one control sample is typically taken outside the most commonly used entrance into the building, then one or more air samples are collected in the areas of concern within the building. Elevated airborne spore concentrations may indicate an indoor microbial reservoir(s), or that cleaning of personal effects or the HVAC system(s), is a necessary component of a microbial remediation plan.
- Direct sampling – The purpose of direct sampling is to identify the type and concentration of microbial spores present on affected materials identified with suspected visible microbial growth. The sampling results are also used for reference for source contamination when air samples are taken.
Non-Scope Items – include visual identification and records review for:
- Asbestos Containing Building Materials (ACM)
- Lead-Based Paint
- Fire Reduction Chemicals
Qualifications – No federal guidelines exist at this time. However, some States have placed requirements for licensed Mold Assessors and Mold Remediators. For those States that do not have specific requirements, it is recommended that you use a person who:
- Has taken a minimum of 16 hours of mold assessment and remediation courses,
- Follows one of more of the recognized industry guidelines and practices, and
- Acquires, at a minimum, 8 Continuing Educational Units (CEUs) bi-annually.
A person not meeting one or more of those qualifications may assist in the conduct of a Mold Remediation Protocol if the individual is under the direct supervision or responsible charge of a person meeting the minimum qualifications.